Showing posts with label Task 5 Using A 3D Game Engine. Show all posts
Showing posts with label Task 5 Using A 3D Game Engine. Show all posts

Task 5 Using A 3D Game Engine

Unity final level

For my first step of my level I looked at the floor plans I had gathered and created these four corridors to be the base at which I would create my level. I also left a space in the middle for my the courtyard. The left and right floors are textured due to the fact I wanted to see how it would look and to make sure the texture pack I downloaded worked.

I then began to sprout off a corridor to the left, back side of the building. This corridor would initially lead to one of the spawn rooms that a team would spawn in.
I then copied the same design to the other side, making sure that the map was kept in symmetrical condition.
I then made the front porch of the hospital, this would show that is is the front of the hospital.
I added in some steps that would lead down from the porch to a grassy area which would be where a portion of the map could be explored.

After creating the bottom floor of the hospital I began to build the walls for the bottom floor so that I knew how high to make my second floor. I also began to add some steps in the back area of the map.

Those stairs at the back of the map would lead up to the next level of the hospital. The spawns lead to an intersection that allows the player to either turn right or left so that if they were battling players they have multiple routes to tackle the situation.

This is what the hospital looks like from a birds eye view, as you can see it has been kept symmetrical.

Once I created the next floor I began to add walls to the next floor making sure the roof is the same distance as the space from the first floor to the second floor, this is the full map that can be walked around, once I had done this then I had to start making props.

This first prop is a column I made for the porch, it was made by using face extrusions both outwards and inwards and extruding the blocks outwards in general. As you can see I was going for a simple yet creative design.

This is another column I made but for the front grass area of the level, this a very simple design with me using a cylinder, I extruded the top face and then extruded the full shape so it has that blocky base with a thin shaft, I then extruded the face in the top area but outwards so that it matched the blocky base.


This gate was the hardest prop to make, I had to make a singular column with an intricate design that I could copy and then mirror. I then made a torus shape and the letter M, the letter M was chosen for mystery. Finally I added the bars.

Below is the fences I made, I created these by making a simple block for the base and pushing both of the top line segments inwards to create a curve. I then got a cylinder and through extruding the faces and whole shape I made a small yet tricky design. Then I got regular cylinders and began using them as bars to connect the extruded cylinders.

This image showcases the M and torus shape on its own.

This shows the column exterior.

This showcases the bars of the gate.

This is the door I created for the level, it is made up of multiple blocks fit together perfectly. I made multiple blocks due to the fact that I had to use multiple textures to get it the way I wanted to look.

I highlighted the faces of the door to show the multiple blocks I used.

This is the fountain I made

This a crate prop that I made by extruding the faces of the crate smaller and then extruding them inwards the centre of the shape giving it that indent.

This is a group of crates, by using the stretching tool I could take the first crate and stretch multiple copied crates to make new designs.

This is a bookshelf I made, I started off with a simple cube and stretched the sides to make a rectangular shape. I then extruded the front face inwards to create the space for the books to go and extruded the bottom face to give the bookcase support. I followed this up by getting more cubes and stretching them into a thing rectangular shape that you can see on the inside, these are what divide the book piles up.

Below are the book stacks I made, I created these by starting off with creating a singular book. To create a singular book I had to create two cubes, the first cube would be extruded and curved at the back to create the hard back cover of the book while the second cube would be used as paper, I stretched it on all sides to fit inside of the first cube to create the book prop. I then copied the singular book and stacked them upwards. On the left is what the books look like when they are textured.

This is a cabinet I made, although it was not put into my level. I made this by extruding each side out and extruding the front face inwards a little to give the illusion that this filing cabinet can be opened. I then got three cubes, scaled them down and placed them together to create a handle. Copying the three cubes I created three copies and placed them all along the filing cabinet.

This is a table I created, I made this by starting off with a cube. I extruded each side outwards and then using the line segments are the corner of the extruded sides I moved them inwards to create a curve around the table. I then got a cylinder and extruded the face of one side making it larger, I extruded this face and moved it until it was a good size, I extruded again and narrowed the face down so it looks like a sphere with a flat bottom.

This is a bed I created using a cube and cylinder, I created the cube first, extruded the sides and joined the line segments together to create an old fashioned mattress. I then got cylinder for the front and back of the bed within which I curved them in the corners. I created more cylinders and made them all connect.

This is what my bed looks like close up and fit together.

After I had made all my props and map I began to texture, for the outside area I used a grass texture and for the porch I used a wood texture.
For the floor I used a texture downloaded from the asset store from a horror hospital pack, the texture uses a hospital patterned floor.

For the walls I used a concrete type material that looks as though it is wearing away.

After the texturing was done I began to place all my props into the map. As you can see I placed the bookshelves on the top floor and in the courtyard I placed the fountain.

I used a book texture pack to texture the books each with a different colour and for the bookshelf I used a rotten wood texture to show that it is a run down map.

I placed a roof on the map and began to add lighting, for the lighting I used spotlights as that was the traditional 1940's look and made them bright to contrast the dark atmosphere of my world.

I also placed a lighting effect on my character to make it look as though they are carrying around a flashlight.

This is showcasing one of the hallways, as you can see there is a crate (which has been textured with a wood material) in the fore front and a bed (which has a rusted metal texture for the cylinders and white texture for the mattress) in the background. Both of these props would be used for cover.

This is a look at the courtyard, as you can see I placed a brick texture for the walls and cracked concrete texture for the floor and fountain. There are also bed props and crate props outside.


This showcases off another hallway and gives a close look at a textured bed.

This is what the front of the map looks like, as you can see I used a stone pattern texture for the columns, a concrete texture for the base of the fences and a shiny metal with patterns for both the fences and gate.

This is a closer look at the fences.

This is another column and I used a concrete texture with patterns in to show it off and make it look better made than the other columns.

This is what the door looks like when it has been textured. I used a glass texture for the middle part that is surrounded by a dark rusted metal. For the top part of the door I used a grey patterned wood and the bottom uses a silver rusted metal. The door handle uses a normal metal texture.

This is a look at the textured crates.

This is a showcase of the front of the hospital, as you can see I added cylindrical columns to both sides of the front part.

This is the other side being shown off the show it's symmetrical.

I also added cylindrical columns to the spawns corners.

This is what the door looks like inside of the hospital, it gives an ominous vibe to the map.

I then added a night time skybox to the map.

I placed the character spawn in front of the hospital so that when it got recorded it would be easiest to show off the level.

This is what the level looks like as you explore it, as you can see it is quite dark and very ominous.

Here is another shot of the corridors and me working on the lighting.

This is what the front of the hospital looks like as you play the level.

This is another corridor, showcasing of the crates.

This showcases off what the doors look like in game.

This is what the table prop looks like in game.

This is what the fountain ad courtyard look like in game.


and this is what the top floor looks like in game.

Failed attempts
Below is a look at the failed props, it took me several tries to get the fountain right as the shapes weren't looking symmetrical and wouldn't texture properly. You can also see a failed door that was supposed to have a cylindrical glass middle area but I couldn't get the polygons to fit around it right.

This is also a level I started off with, I was originally going to make a roof of a hospital with this being one of the spawn areas. I started off by building a small room and doorway and then expanding into this hallway filled with more rooms of bigger and smaller size. It was supposed to branch off and stairs were supposed to lead to a floor inside of the hospital and on the roof but it didn't feel like it would suit a 1940's type hospital and would be more modern day. Also the way that I was going to have two floors with the design I had in mind felt too ambiguous to pull off.

As you can see the level seems quite convoluted and messy, this is due to the fact I didn't look at any floor plans. I jumped straight into making the level and didn't really plan out much until I scrapped this level.


This is my video for my 3D unity level. My only problem I have is the game rendered out brighter than I would have liked so it takes away that look and feeling of ominous. However, I am still proud of my level and if I had the chance to create another level or go back and make this one I believe I could make it better as I have a massive understanding of how unity works.